Jump to Navigation

POLAR Label System SC-22MB

POLAR Label System SC-22MB

System for the Offline Production of Square-cut Labels

POLAR Label System SC-22MB is a variant of the SC-21MB intended for the offline production of square-cut labels.

The prepared reams are fed to the high-speed cutter and cut into strips. The strips are manually loaded into a board buffer.

The buffered material is taken over into the Label System SC-22MB by a board buffer of identical design, and the strips are manually fed onto the buffer/loading table LT-S where they are aligned.

A complete layer of strips, e.g. 70 x 100 cm (27 1/2 x 39 3/8 in) is automatically taken over, aligned and cut into products. All labels produced in a cutting cycle are fed to the welding station of the bander in a single pass and then banded.

The preparation of cutting material and the loading of the POLAR Autotrim can be carried out as flexibly as on POLAR Cutting Systems 2, 4, 5 or 6.

The POLAR Pressing Station can be integrated in the cutter loading mechanism. On the Label System SC-22MB, the pressing station increases the cutting precision and the output, since the remaining air is squeezed out of the prepared reams and the usual cycle of "clamping without cut" can be omitted.

 Print Version

Global, Regional, Local
Global, Regional, Local

Heidelberg's 250 support centers in 170 countries and a team of over 7,500 sales staff, 3,800 of which are service technicians, mean we have the most compre- hensive sales and service network in the entire indus- try. Heidelberg generates 85 percent of its sales through its own sales companies and achieves around 87 percent of its sales abroad.

© Heidelberger Druckmaschinen AG